for Salty Series Rod Holders

Accessories, Mounts, & Parts for Salty Series Rod Holders.
Sort By:  
Salty Rod Holder (Only)
$30.25
S-16 Salty Bolt-On Mount
$19.80
S-15 Salty Rail Mounting System
$19.80
Salty Rod Holder Halves Set with Pin (Only)
$18.15
S-12 Salty Inboard Mount
$15.40
1/4-20 Wingnut - Medium Powder Coated (for use with the models S-11PC, S-14PC, & S-17PC)
$1.10
4" Stainless Steel 1/4-20 Carriage Bolt (for use with the models S-10PC or S-10)
$1.10
1/4-20 Wingnut - Large Powder Coated (for use with the model S-10PC)
$1.10
1/4-20 Wingnut - Large (for use with the model S-10)
$0.55
4" Zinc Plated 1/4-20 Carriage Bolt (for use with the model S-10)
$0.55
1/4-20 Wingnut - Medium (for use with the models S-11, S-14, & S-17)
$0.55
3-1/2" Zinc Plated 1/4-20 Carriage Bolt (for use with the models S-11, S-14, & S-17)
$0.55
Salty Rod Holder (Only) (SRH-1)
Salty Rod Holder (Only)

Salty Rod Holder (Only)
$30.25
S-16 Salty Bolt-On Mount (S-16)
S-16 Salty Bolt-On Mount

S-16 Salty Bolt-On Mount comes with the bolting hardware.

Used to convert any Salty Series Rod Holder to an S-17 Salty Bolt-On Rod Holder.
S-16 Salty Bolt-On Mount
$19.80
S-15 Salty Rail Mounting System (S-15)
S-15 Salty Rail Mounting System

S-15 Salty Rail Mounting System allows you to convert any Salty Series Rod Holder to an S-14 Salty Rail Rod Holder.

Comes with the mount, rail cap, rubber strips, & hardware.
S-15 Salty Rail Mounting System
$19.80
Salty Rod Holder Halves Set with Pin (Only) (SRH-2)
Salty Rod Holder Halves Set with Pin (Only)

Salty Rod Holder Halves Set with Pin (Only)
$18.15
S-12 Salty Inboard Mount (S-12)
S-12 Salty Inboard Mount

S-12 Salty Inboard Mount comes with the bolting hardware.

Used to convert any Salty Series Rod Holder to an S-11 Salty Inboard Rod Holder.
S-12 Salty Inboard Mount
$15.40
S-10 Clamp (S-10Clamp)
S-10 Clamp

S-10 Clamp is available as replacement parts.

Please note that you need to order two S-10 Clamps in order to convert any Salty Series Rod Holder to an S-10 Salty Rod Holder (4" bolt & large wingnut must be purchased separately).
S-10 Clamp
$11.00
D/S-15 Rail Cap (D/S-15)
D/S-15 Rail Cap is used with an S-12 Salty Inboard Mount to convert to an S-15 Rail Mounting System. Comes with hardware.
D/S-15 Rail Cap
$5.50
1/4-20 Wingnut - Medium Powder Coated (SMWN-2)
1/4-20 Medium Powder Coated Wingnut for use with Salty Series Powder Coated Rod Holder Models: S-11PC, S-14PC, & S-17PC.
1/4-20 Wingnut - Medium Powder Coated (for use with the models S-11PC, S-14PC, & S-17PC)
$1.10
4" Stainless Steel 1/4-20 Carriage Bolt (SCSS-4)
4" Stainless Steel 1/4-20 Carriage Bolt for use with Salty Rod Holder Models: S-10 & S-10PC.
4" Stainless Steel 1/4-20 Carriage Bolt (for use with the models S-10PC or S-10)
$1.10
1/4-20 Wingnut - Large Powder Coated (SLWN-2)
1/4-20 Large Powder Coated Wingnut for use with Salty S-10PC Rod Holder.
1/4-20 Wingnut - Large Powder Coated (for use with the model S-10PC)
$1.10
1/4-20 Wingnut - Large (SLWN-1)
1/4-20 Large Wingnut for use with Salty S-10 Rod Holder.
1/4-20 Wingnut - Large (for use with the model S-10)
$0.55
4" Zinc Plated 1/4-20 Carriage Bolt (SCP-4)
4" Zinc Plated 1/4-20 Carriage Bolt for use with Salty S-10 Rod Holder.
4" Zinc Plated 1/4-20 Carriage Bolt (for use with the model S-10)
$0.55
1/4-20 Wingnut - Medium (SMWN-1)
1/4-20 Medium Wingnut for use with Salty Series Rod Holder Models: S-11, S-14, & S-17.
1/4-20 Wingnut - Medium (for use with the models S-11, S-14, & S-17)
$0.55
3-1/2" Zinc Plated 1/4-20 Carriage Bolt (SCP-3)
3-1/2" Zinc Plated 1/4-20 Carriage Bolt for use with Salty Series Rod Holder Models: S-11, S-14, & S17.
3-1/2" Zinc Plated 1/4-20 Carriage Bolt (for use with the models S-11, S-14, & S-17)
$0.55
Per Page      1 - 14 of 14
  • 1